LONESTAR™
The Cleaire Lonestar is specifically designed to provide cost-effective diesel particulate (PM) and NOx reductions for in-use diesel engines operating in off-road applications.
Configured in a modular, user- friendly design, Longview integrates a NOx reduction catalyst and catalyzed wall-flow silicon carbide diesel particulate filter. This provides simultaneous reduction of NOx, PM, hydrocarbon (HC) and carbon monoxide (CO) from one system.
- CARB verified to Level 3+ (>85%) compliance for PM
- NOx reduction of at least 40%
- Eligible for local, state and federal funding programs
- The practical alternative to vehicle replacement
- Uses diesel fuel rather than ammonia or urea as a NOx reduction reagent
- Durable state-of-the-art stainles steel technology
Lonestar is managed by Cleaire’s proprietary MLC® which monitors system parameters and controls NOx reductant injection. The MLC also logs the monitored parameters for later retrieval and analysis.
Cleaire uses only the highest quality materials, including all stainless steel construction and a robust silicon carbide diesel particulate filter for enhanced durability. Additionally, numerous inlet/outlet end cone configurations are available for installation ease.
Lonestar’s modular design facilitates service and de-ashing of the diesel particulate filter. The reusable metal seal and band clamp design provides quick turn around for maximum up time.
The Cleaire Lonestar balances the need for cleaner air with the demanding requirements of real-world off-road diesel applications and the need to maximize the economic life cycle of your equipment while avoiding costly replacement.
Visit the Application Photo Gallery and browse the many types of equipment operating Cleaire retrofit systems.
| LONESTAR™ Quick Specs | |
|---|---|
| Filter Type | Passive diesel particulate filter with NOx redutciton |
| CARB Verification > Engine PM Limit |
0.12g/bhp-hr PM and lower engines |
| CARB Verification > Engine Model Years |
1996-2009 |
| CARB Verification > Engine Horsepower |
150-350 horsepower |
| CARB Exclusions | No 2-stroke engines No OE diesel particulate filter No external EGR Turbo charged engines only |
| Typical Applications | loaders, graders, excavators, scrapers, cranes and other construction equipment |
| PM Reduction | Greater than 85% (Level 3+) |
| NOx Reduction | At least 40% |
| Fuel Compatibility | ULSD / Up to B20 |
| Exhaust Temperature Requirement | 260° C for at least 70% time |
| Regeneration Type | Passive |
| Regeneration Time | n/a |
| Engine run time between regenerations | n/a |
| Eligible for local, state and federal funding programs | Yes |
| Dimensions | 49" (L) x 14" (W) |
| Shipping Weight | 135 lbs. |
| Verification Document | Download PDF |
| Engine Family List | Download PDF |
| Product Spec Sheet | Download PDF |
